Bulletproof
Also known as: laminated safety glass, armoured glass, laminated stadip protect, laminated stratobel

Bulletproof


What is bulletproof glass?

Bulletproof laminated safety glass, also called bulletproof glass, is a composite product consisting of at least three glass panes of glass joined together using various synthetic binding between layers. The manufacturing is done under such high pressure and temperature that the binding layers weld the various panes of glass permanently.

What are the features of bullet proof glas?

The main feature is that, in case of firing, depending on the composition, the glass meets the test S or NS, and the bullet doesn't pierce the glass. Secondly this kind of glass, unliketempered safety glass, is editable after manufacture. If necessary, it can be cut, drilled or sawed. Furthermore the glassreserves it's looks and value even after a long time, in contrary to certain other "temporary" protections. The identification of eachglass volume by means of its own code is in addition a preventive, psychological deterrent.

What are the advantages of bullet proof glass?

Acoustic comfort 
The laminated composite of the glass increases the acoustic value compared to ordinary glass with the same thickness.

Thermal comfort
The single and laminated edition of the glass increase the thermal comfort.

Visual comfort 
The usage of coloured foil instead of clear foil improves the visual comfort.

Protection from Ultraviolet Radiation 
The folio stops all UV rays and thus protects against discoloration of the exposed.

Precaution at installation

In this area there should specifically be referred to:

  • The single technical specification NBN 23-002
  • General frame for the implementation of private buildings
  • Technical requirements Part 2 Episode 22. Glass and mirror work in 1982, and any subsequent adjustments

More specifically, particular attention to the following technical requirements:

  • Minimum requirements for windows because of the mechanical resistance.
  • Height and width of the grooves must be sufficiently adapted to the entire glass surface. Illuminated frames are necessary.
  • Type of seal products. Neutral silicon.
  • Confirmation of the glazing bars.
  • Side that should be exposed to the potential shooting.
  • Identification number on each window.
  • The thickest sheet glass should always be placed along the side of the aggressor.

Because of an increased foil thickness the bullet proof glass can also meet the standards of burglar glass. Nevertheless, do take into account the fact that burglaryproof glass is framed. Bulletproof glass in counters is usually free and is such cases does not respond to the standards regarding burglary-proof glass. It should be taken into account the fact that no composition can be altered, even by increasing the number of foil. If there is, the approval will automatically invalidate. 




Bulletproof

Bulletproof

Bulletproof


Classification

Recommended composition of Bulletproof glass (reference product)


Klasse proef "S" Wapen & munitie Mogelijke diktes (mm)
BR1S- BR1NS Karabijn 0,22 LR 14
BR2S- BR2NS Pistool 9mm Luger 22,5/16
BR3S- BR3NS Pistool 0,357 Magnum 22,2/18
BR4S- BR4NS Pistool 0,44 REM 27,4/34,5/21,5/20
BR5S- BR5NS Geweer 5,56 x 45 38,6/34,8/33
BR6S- BR6NS Geweer 7,62 x 51 60/42/37,5
BR7S- BR7NS Geweer 7,62 x 51 68/69,4
SG1S- SG1NS Riot gun CAL. 12/70 Brenneke 34,5/24
SG2S- SG2NS  Riot gun CAL. 12/70 Brenneke 36,3/30